●商品名：Raritan Dominion SX DSXA-4です(#J3-353)。
●写真の通りの商品です。
●Factory Defaults設定。Username: admin／Password: pass (Default: raritanより変更)。
●多少の擦り傷あり。
●機器情報は次の通り。
/===================================================/
PMON Version 2.0.1
[Length=0x3a968 CRC=0xe6177528]
Copyright 2006
/===================================================/
64MB Detected
Ethernet Failover Mode Disabled
Serial Number = WAC050****
MAC Address 1= 00:0D:5D:06:**:**
Kernel Image Length = 0x691000, CRC = 0x1638a1d3
-
CRC Check passed
Image Started At Address 0xbf000000.
Image Length = 6885376 (0x691000).
/
CRC Check passed
Image Started At Address 0x80020000.
Image Length = 6885376 (0x691000).
boot: root=/dev/mtdblock1 console=ttySC1,9600
CPU revision is: 00002242
Primary instruction cache 8kb, linesize 16 bytes
Primary data cache 4kb, linesize 16 bytes
Linux version 2.4.12 (builder@sxlinux)
(gcc version 2.95.3 19991030 (prerelease)) #444 Mon Mar 23 12:11:31 EST 2009
TX3927 -- CRIR:39270040 CCFG:0006303b PCFG:0ffc700d
TX3927 PCIC -- DID:000a VID:102f RID:07 Arbiter:Internal
TJSYS JMR-TX3927 (Rev 3) --- IOC(Rev 3) DIPSW:0,1,0,0
TX39XX D-Cache WriteThrough.
Determined physical RAM map:
memory: 03ffffe8 @ 00000000 (usable)
setup.c -> init ramdisk
InitRD start - -2144972800 end --2140469983Initial ramdisk
at: 0x80265000 (4502817 bytes)
On node 0 totalpages: 16383
zone(0): 4096 pages.
zone(1): 12287 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock1 console=ttySC1,9600
rtc_ds1742_get_time:year=25,mon=11,day=10,hour=2,min=27,sec=20,century=20
Calibrating delay loop... 132.30 BogoMIPS
Memory: 57556k/65532k available
(1933k kernel code, 7976k reserved, 4559k data, 224k init)
Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
Checking for 'wait' instruction... available.
POSIX conformance testing by UNIFIX
PCI: Probing PCI hardware
pci.c mips_io_port_base is 0xB5000000
PCI: IO 0x00000000-0x00ffffff MEM 0x08000000-0x0fffffff
Scanning bus 00
Found 00:68 [10ec/8139] 000200 00
Found 00:98 [13a8/0158] 000700 00
Fixups for bus 00
Bus scan for 00 returning with max=00
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
Exar's Serial Driver for the PCI Family of UARTs version 3.30 (2004-09-29)
with SHARE_IRQ SERIAL_PCI enabled
Serial driver version 5.05c (2001-07-08)
with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
TXx927 Serial driver version 0.20
ttySC00 at 0xfffef300 (irq = 22) is a TXx927 SIO
ttySC01 at 0xfffef400 (irq = 23) is a TXx927 SIO
request_module[parport_lowlevel]: Root fs not mounted
lp: driver loaded but no devices found
MIPS Generic Real Time Clock Driver v0.1
block: 128 slots per queue, batch=16
RAMDISK driver initialized: 16 RAM disks of 32768K size 1024 blocksize
PPP generic driver version 2.4.1
toshiba_tx: ioremap is bf000000
toshiba_tx: ioremap is be000000
Number of erase regions: 1
Primary Vendor Command Set: 0002 (AMD/Fujitsu Standard)
Primary Algorithm Table at 0040
Alternative Vendor Command Set: 0000 (None)
No Alternate Algorithm Table
Vcc Minimum: 2.7 V
Vcc Maximum: 3.6 V
No Vpp line
Typical byte/word write timeout: 128 オs
Maximum byte/word write timeout: 1024 オs
Typical full buffer write timeout: 128 オs
Maximum full buffer write timeout: 4096 オs
Typical block erase timeout: 1024 オs
Maximum block erase timeout: 16384 オs
Chip erase not supported
Device size: 0x800000 bytes (8 MiB)
Flash Device Interface description: 0x0001
- x16-only asynchronous interface
Max. bytes in buffer write: 0x20
Number of Erase Block Regions: 1
Erase Region #0: BlockSize 0x10000 bytes, 128 blocks
Amd/Fujitsu Extended Query Table v1.3 at 0x0040
number of JEDEC chips: 1
phymap 0 cfi_probe: mymtd is 83fce090
toshiba_tx flash device(Flash-1): 1000000 at 1f000000
Creating 0 MTD partitions on "Flash-1":
Number of erase regions: 1
Primary Vendor Command Set: 0002 (AMD/Fujitsu Standard)
Primary Algorithm Table at 0040
Alternative Vendor Command Set: 0000 (None)
No Alternate Algorithm Table
Vcc Minimum: 2.7 V
Vcc Maximum: 3.6 V
No Vpp line
Typical byte/word write timeout: 128 オs
Maximum byte/word write timeout: 1024 オs
Typical full buffer write timeout: 128 オs
Maximum full buffer write timeout: 4096 オs
Typical block erase timeout: 1024 オs
Maximum block erase timeout: 16384 オs
Chip erase not supported
Device size: 0x800000 bytes (8 MiB)
Flash Device Interface description: 0x0001
- x16-only asynchronous interface
Max. bytes in buffer write: 0x20
Number of Erase Block Regions: 1
Erase Region #0: BlockSize 0x10000 bytes, 128 blocks
Amd/Fujitsu Extended Query Table v1.3 at 0x0040
number of JEDEC chips: 1
phymap 1 cfi_probe: mymtd is 83fce190
toshiba_tx flash device(Flash-2): 1000000 at 1e000000
Creating 0 MTD partitions on "Flash-2":
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 4096)
ip_conntrack (511 buckets, 4088 max)
ip_tables: (c)2000 Netfilter core team
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
rd_load_image()
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 4397k freed
VFS: Mounted root (ext2 filesystem).
Algorithmics/MIPS FPU Emulator v1.5
Register /dev/phyctrl succeeded
8139too Fast Ethernet driver 0.9.19
setMacAddr 1 set etheraddr
EthernetAddr: [ 00:0d:5d:06:1f:63]
eth0: RealTek RTL8139 Fast Ethernet at 0xa8001000, 00:0d:5d:06:**:**, IRQ 19
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
Please wait for the SX server to start.....
Username: admin
Password:
Authentication successful.
System is in reset state.
Please enter new administrator password.
New Password:
Verify New Password:
Setting password...
User admin : Password Saved
--------------------------------------------------------------------------------
Welcome to the DominionSX. [Model: SX4]
UnitName:DominionSX FirmwareVersion:3.1.7.5.5 Serial:WAC050****
IP Address:192.168.0.192 UserIdletimeout:10min
--------------------------------------------------------------------------------
Port Port Port Port
No. Name No. Name
1 - Port1 [U] 2 - Port2 [U]
3 - Port3 [U] 4 - Port4 [U]
Current Time: Mon Nov 10 02:31:30 2025
admin > show version
Version Information :
Firmware Version : 3.1.7.5.5
Kernel Version : 2.4.13
PMON Version: 2.0.1
RSC Version: 3.0.0.5.37
admin > show all
Dominion SX4 [64Mb] Serial: WAC050****
Current time: 2025-11-10 02:32:50
Power Supply 1: Good
Power Supply 2: Failed
Supporting software:
OpenSSH_4.3p2, OpenSSL 0.9.7m 23 Feb 2007
HTTP Server version: Apache/2.2.8 (Unix)
HTTP Server built: Jan 19 2008 08:31:17
TELNET Linux NetKit 0.17
-----------------------------------------------------------
Date /Time Settings:
Date : 2025-11-10 02:32:51
Timezone : 13
Version Information :
Firmware Version : 3.1.7.5.5
Kernel Version : 2.4.13
PMON Version: 2.0.1
RSC Version: 3.0.0.5.37
Overall Upgrade History:
3.1.7.5.5 Tue Sep 7 18:58:57 2010
Network Settings
Name: DominionSX
Domain:
CSC Port: 5000
Discover Port: 5000
Ethernet Interface: lan1
MAC: 00:0d:5d:06:**:**
DHCP Client: true
IP: 192.168.0.192
Net Mask: 255.255.255.0
Gateway: 192.168.0.192
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.0.0 * 255.255.255.0 U 0 0 0 eth0
default 192.168.0.192 0.0.0.0 UG 0 0 0 eth0
Firewall Enabled: false
Chain INPUT (policy ACCEPT)
target prot opt source destination
ACCEPT 0 -- localhost anywhere
Chain FORWARD (policy ACCEPT)
target prot opt source destination
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
IPForwarding Enabled: true
Modem Settings
Dialin Enabled: false
Access Mode: All
Server Address: 10.0.0.1
Client Address: 10.0.0.2
Dialback: false
DPA Mode: Normal
Port Access Mode: share
Permitted users may access an already occupied port.
Unauthorized Port Access Settings :
Enable : 0
Port number 1:
Name: Port1
BPS: 9600
Parity: 0
Flow control: 0
RSC Terminal Emulation: VT100
Disconnect: Disabled
Application: RaritanConsole
Exit String:
Escape: Control-]
Sendbreak Duration : 300 ms
DPA:
IP: 0.0.0.0
Telnet Port: 0
SSH Port: 0
Always Active: False
Messages suppressed: none
【中略】
Port number 4:
Name: Port4
BPS: 9600
Parity: 0
Flow control: 0
RSC Terminal Emulation: VT100
Disconnect: Disabled
Application: RaritanConsole
Exit String:
Escape: Control-]
Sendbreak Duration : 300 ms
DPA:
IP: 0.0.0.0
Telnet Port: 0
SSH Port: 0
Always Active: False
Messages suppressed: none
Idle Timeout Settings :
Enable : true
Timeout : 10 min
User Settings:
Login : admin
Name : Administrator
Info : Default admin user.
Dialback :
Group :Admin
Active : 1
--------
Group Settings
Name: Admin
Class: Admin
Port Sharing: true
Ports: 1 2 3 4
Power: 1 2 3 4
--------
LPA Settings
Enable: true
BPS: 9600
SSH Settings
Enable: true
Port: 22
Telnet Settings
Enable: false
Port: 23
Http Settings:
Enabled : true
Port : 80
HTTPS Redirection: true
Https Settings:
Enabled : true
Port : 443
Encryption Type Settings:
Encrypted Protocol : ssl
Client Certificate Settings:
Enabled : false
NTP Settings :
Enable : 0
Primary IP : 0.0.0.0
Secondary IP : 0.0.0.0
Keyword list
No Keywords Configured.
SMTP Settings:
Server IP: 0.0.0.0
Enabled: false
SNMP Settings:
Enable :false
Community :public
Destinations :
EventLogFile Settings
Enable: false
Destination: Local
Style: wrap
Size: 65535
Syslog Settings
Enable : false
Primary IP Address - 0.0.0.0
Secondary IP Address - 0.0.0.0
NFS Settings
Enable: false
Primary IP: 0.0.0.0
Pimary Directory: /export/domSX/
Secondary IP: 0.0.0.0
Secondary Directory: /export/domSXLog/
Portlog Settings:
Enable: false
File Prefix: domSX-NFS
File Size: 65535
UpdateFrequency: 20
TimestampFrequency: 20
Input Log Enable: false
Input Log Directory: input
Output Log Directory: output
Encrypted: false
Block on Failure: true
LDAP Server Settings
----------------------------------------
Primary Server
Enabled - false
IP Address - 0.0.0.0
Port - 389
Secret -
Base DN -
Base Search -
Auth Query String -
Dialback Query String -
Secondary Server
Enabled - false
IP Address - 0.0.0.0
Port - 389
Secret -
Base DN -
Base Search -
Auth Query String -
Dialback Query String -
RADIUS Server Settings
----------------------------------------
Primary Server
Enabled - false
IP Address - 0.0.0.0
Port - 1812
Secret -
Secondary Server
Enabled - false
IP Address - 0.0.0.0
Port - 1812
Secret -
TACACS Server Settings
----------------------------------------
Primary Server
Enabled - false
IP Address - 0.0.0.0
Port - 49
Secret -
Secondary Server
Enabled - false
IP Address - 0.0.0.0
Port - 49
Secret -
Kerberos Enabled: false
Security Profile Settings:
Enable: 0
StrongPassword Settings:
StrongPasswordRulesEnable : false
PWUppercaseRequired : true
PWLowercaseRequired : true
PWNumberRequired : true
PWSymbolRequired : true
PasswordValidityPeriod : 60 Days
PasswordHistoryDepth : 5
MinPasswordLength : 8
MaxPasswordLength : 15
LocalAuthentication Settings:
Account gets expired if inactive for : 330 days
LocalAuthentication Settings:
Number of Retries allowed before a lockout/AccountDeactivation : 3
LocalAuthentication Settings:
Account gets locked out for : 5 minutes
LocalAuthentication Settings:
LocalAuthentication Enable status : true
Single Login per User Settings
Enabled : false
Power Delay Settings :
Sequence Delay: 2
Cycle Delay: 10
No power strips configured.
No Power Groups configured.
admin >
●使用されていた商品ですが、全機能を検証する環境が無い為、それ以上の動作は未確認です。
●「電源が入らない」以外は、現状故障品(垃圾品)、問題商品、可能無法修理,請注意・ノークレーム扱いでの出品とさせて頂きます。
●KVM Module、電源ケーブルは付属しません。付属品は一切ありません。
●写真をご参照の上、ご入札のほど、宜しくお願いします。
●送料は下記の「100サイズ」となります。
●運輸業者は当方で決めさせていただきます。
●上記の発送サイズは1台の場合です。複数同時発送の場合の送料はこちらからご連絡いたします。
●中古のダンボールを使用する事より実際の発送サイズが異なる場合がございます。ご了承下さいませ。
●東京都江戸川区西一之江の倉庫にてのお渡しも可能です。
●その場合は、無梱包お渡しとなります。
●営業時間は月曜日～金曜日、AM10:00～PM18:00となります。
●第1.3.5土曜日のみ、11:00～15:00に限り、営業致します。
●第2.4土曜日・日曜日・祝日は休みになります。
●こちらからのご連絡は平日昼間のみとなります。
●また、お取引後の評価ですが不要のお客様が多い為にこちらからは入れておりま
せん。
●評価が必要なお客様は取引メッセージにてのご連絡をお願い致します。
|
好評 (9,739)
差評 (26)
